Position: Index > Power Supply Circuit >


2015-03-22 01:08  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The diagram is a power supply circuit using the isolated feedback capabilities of the TL3103 for both current and voltage sensing. This supply is powered fromthe ac power line and has an output of 5 Vat 1.5 A. Both output voltage and current are sensed and the error voltages are applied to the error amplifiers of the TL594 PWM control !C. The 24-V transformer produces about 35 Vat the 1000-I`F filter capacitor. The 20-kHz switching frequency is set by the 6-KO resistor and the 0.01-I`F capacitor on pins 6 and 5, respectively. Isolated-feedback-power-supply - schematic
The TL594 is set for push-pull operation by typing pin 13 high. The 5-V reference on pin 14 is tied to pin 15, which is the reference or the current error amplifier. The 5-V reference is also tied to pin 2 which is the reference for the output voltage error amplifier. The output voltage and current limit are set by adjustment of the 10-KO pots in the TL3103 error-sensing circuits. A pair of TIP31E npn transistors are used as switching transistors in a push-pull circuit.