Position: Index > Power Supply Circuit >

Low Noise Power Supply for Audio Circuits (BUV298V)

2015-03-18 00:24  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Low Noise Power Supply for Audio Circuits (BUV298V). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:BUV298V.

This low noise audio power supply circuit can reduces noise and ripple voltage by 40dB over the 100Hz to 20kHz audio range. In portable application such as cellular phones and multimedia notebook computers, a clean source of 5V power for driving audio circuits can be provided by this circuit. Noise up to 1000Hz or so is rejected by most linear regulators and the bulk of a low-frequency passive filter is not compatible in portable applications. Noisy Vcc in the range 4.5V to 6V is accepted by this circuit. Here’s the circuit diagram:

Low Noise Power Supply for Audio Circuits circuit schematic diagram

This circuit also produces quiet Vcc at a DC level 7% lower. For example, the circuit produces 4.65V at 1A from a nominal 5V source, with only 200μA of quiescent current. The physical layout is very small: one SOT23 transistor, one μMAX (shrink SO-8) op amp, and a few passive components. 10μF is the largest capacitor, and the resistors can be 0.1W or surface-mount 0805 size.

Reprinted Url Of This Article: