Position: Index > Power Supply Circuit >

Micropower Thermocouple Signal Conditioner with Cold Junctio

2015-03-18 21:22  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

View Full Size Image View Original DatasheetMicropower Thermocouple Signal Conditioner with Cold Junction Compensation

A thermistor, shown as R3, is used to monitor the cold junction temperature. Its resistance becomes smaller as the cold junction temperature increases. An increase in cold junction temperature will reduce the output voltage of the Type J thermocouple by 52uV/C. The voltage reference and scaling of resistor values creates an increasing 52uV/C voltage change at the amplifier input as the thermistor resistance value changes.




Reprinted Url Of This Article:
http://circuits.linear.com/429