Position: Index > Power Supply Circuit >

Soft Start for PSU

2015-03-20 19:17  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Two soft start power supplies. The output voltage slowly increases to the desired output. The output voltage rises slowly and reaches 15 V in 5 seconds.In order to perform this soft-start function, the LM317 voltage regulator IC requires an external universal PNP transistor and the L200 uses its internal comparator (pin 2). visit page.Soft Start for PSU - schematic
After switch-on, the rising voltage on the positive side of the charging electrolytic capacitor slowly turns the (initially conducting) transistor off, thus raising the voltage (relative to ground) on the adjustment pin of the LM317. In the L200 circuit, visit page.