Position: Index > Power Supply Circuit >

Variable Power Supply CIRCUIT (2N3055)

2015-03-21 20:43  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Variable Power Supply CIRCUIT (2N3055). The principle is very simple, very practical. The circuit components can help you understand better grasp this principle. For example, in this circuit, you can go to find and buy these components:2N3055.

This is simple 2N3055 Variable power supply circuit. This circuit has some advantages such as it it can deliver an output voltage between 1,5 V and 15 V with a 500 mA maximum current and low production cost. If the current consumption do not exceed 350 mA, the circuit has stabilization of better than 2%. Here is the circuit:

2n3055 variable power supply circuit schematic

The potentiometer is used to vary the output voltage. When overloading is happened, a buzzer will sound a alarm. This circuit use auto-oscillating buzzer, type 24. P1 slider voltage and the output voltage are compared by T4. The T3-T5 Darlington base current is stopped when the P1 slider voltage is 0,65 V higher than the adjusted voltage. C1 and B1 are used to filter the 18V, 1A transformer voltage. The Bz1 starts the alarm, when the output current is more then 500 mA.

 


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/2n3055-variable-power-supply/