Position: Index > Protect Circuit >

Electronic Fuse for DC Short Circuit Protection(C106)

2016-09-27 15:18  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Electronic Fuse for DC Short Circuit Protection (C106). The principle is very simple, very practical. The circuit components can help you understand better grasp this principle. For example, in this circuit, you can go to find and buy these components: C106.

Project Description

This is an electronic fuse that protects the load against short circuit. Relays must be chosen with a voltage value equals to the input voltage. Don’t omit using the 100uF capacitor with appropriate voltage value with respect to the input voltage. If you can’t provide, you can use C106 instead of BRX46.

Figure:1 Circuit diagram

Figure 1 Circuit diagram

You can adjust the current with using 10K potentiometer. If you will use the fuse with very high currents, lower the 0R6 5W resistor value (ex. 0R47, 0R33, 0R22 or 0R1). Watt value of the resistor should be increased also.

 

 


Reprinted Url Of This Article:
http://www.eeweb.com/blog/extreme_circuits/electronic-fuse-for-dc-short-circuit-protection