Position: Index > Sensor Circuit >

sound detector switch

2014-11-04 20:31  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

When the 555 ic goes into timing mode (triggered by an output signal from the sound detector amplifier,) the timer`s output (pin 3) is set into HIGH for a duration set by C2, and R2. adjusting R1 will adjust how long it listens, from 10 seconds all the way down to 2/10ths of a second. this could be used to listen for hand claps. visit page.sound detector switch - schematic
all resistors are 5 or 10 percent tolerance, 1/4-wattall capacitors are 10 percent tolerance,rated 35 volts or higher visit page.