Position: Index > Simple Circuit >

Simple Countdown Timer On using CD4510

2015-01-11 01:19  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Here is countdown Timer on circuit. this circuit The circuit can be powered from a 9V PP3 battery or 12V DC power supply. The time delay can be varied by replace the resistor value at pin 3 IC555. When the switch is closed, the CD4510  up/down counter is preset to 9 and the 555 timer is disabled with the output held high. This circuit provides a 9 second delay using a 7 segment display. When the switch is opened, the timer produces an approximate 1 second clock signal, decrementing the counter until the 0 count is reached. When the zero count is reached, the ‘carry out’ signal at pin 7 of the counter moves low, energizing the 12 volt relay and stopping the clock with a low signal on the reset line (pin 4). The 1 second clock signal from the 555  timer can be adjusted slightly longer or shorter by increasing or decreasing the resistor value at pin 3 of the timer. The relay will remain energized until the switch is again closed, resetting the counter to 9. Here is a schematic countdown :

 

Simple Countdown Timer On using CD4510 400x205 Simple Countdown Timer On using CD4510








Reprinted Url Of This Article:
http://freecircuitdiagram.net/simple-countdown-timer-on-using-cd4510.html