Position: Index > Simple Circuit >

Simple Logarithmic LED Bar Display Using AN6884 IC

2015-01-08 20:06  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
AN6884 is a logarithmic scale LED bar display driver. AN6884 accept wide range of supply voltage, ranging from 3.5V to 16V. This VU (voltage unit) bar display circuit provides only 5 levels,? but will accept wide range of input level because the scale is logarithmic: -10, -5, 0, 3, and 6dB points. The output current for each LED will be constant at 15mA, suitable for most LED types. Here is the circuit’s schematic diagram.

simple logarithmic led bar diplay an6884 circuit schematic

To operate at voltage higher than 6V, a current limiting resistor R should be inserted between Vcc and the LEDs anodes, and the values should be chosen as shown in the table for appropriate power supply voltage and maximum operating temperature. This circuit is suitable for monitoring audio level of your amplifier’s output. If you need only to measure DC voltage level then the 2.2uF electrolytic capacitor can be omitted. [Circuit's schematic diagram source: Panasonic Application Notes]



Reprinted Url Of This Article:
http://freecircuitdiagram.com/2008/09/17/simple-logarithmic-led-bar-display-using-an6884-ic/