Position: Index > Simple Circuit >

Simple Spectrum Analyzer Adaptor For Scopes Circuit

2015-01-08 12:52  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


Suitable for monitoring an amateur band or a segment of the radio spectrum, this simple adaptor uses an NE602 mixer-oscillator chip to produce a 455-kHz IF signal, which U2 amplifies, then feeds to detector D2 and the Y axis of an oscilloscope. VT is used to drive the horizontal axis input of a scope. L2 and L3 are coils suitable for the frequency range in use. For this circuit, coils are shown for the 10- to 15-MHz range.
Simple Spectrum Analyzer Adaptor For Scopes Circuit

L2 and L3 are wound on Amidon Associates, T-37 or T-50 toroidal cores, and LI is a commercial or homemade variable inductor, etc.



Reprinted Url Of This Article:
http://www.next.gr/meter-counter/meters/simple-spectrum-analyzer-adaptor-for-scopes-circuit-l14884.html