Position: Index > Simple Circuit >

Simple nonlinear low pass filter

2015-01-12 10:17  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This simple circuit is nonlinear passive onlow pass frequency filter. It ‘s small size and easy to made for do not used theexternal power supply, but refuse a lot of noise ripples and need to a input voltage is stable.
The circuit works best, when the signal level is importantly higher than the constant ripple level.
The circuit has specifically related to two peak-detecting sample-and-hold circuits in tandem with a voltage average.

There are parts in figure a few : D1-D4=1N4148, C1=100uF electrolytic ,C2 – 2.2uF ceramic, R1 -100K
I hope this circuit are a little ideas your, to a big project next time.

Related Links
Low Pass Filter
Low noise circuit
Nonlinear low pass filter
Low Pass Active Filter by LM741
60Hz Notch Filter by LM741
Noise Filter Signal using FET 2N3819
Low Pass Filter For FM 88-108 MHz

Reprinted Url Of This Article: