Position: Index > Simple Circuit >

Very simple voltmeter CIRCUIT (LM741)

2015-01-12 19:51  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes a Very simple voltmeter CIRCUIT (LM741). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:LM741.

This circuit can be used to measure the voltage to 15 volts.Using the current from the battery 9 volt,At 23 mA only.
Input circuit has a diode, to protect the Return terminal. And input impedance of the circuit, were more than 1 M ohm.
Heart of the circuit is op – amp number 741.Which acts as a comparator,When the voltage across the pin emitter-bass of the transistor Q1 is a great value.Resistance between the collector and emitter are charged less.Therefore, the voltage at pin 2 of IC1.Therefore less valuable, and the output of IC1 to pay current LED1 light.When we adjust to the middle leg of VR1 to lower pressure. Until the pin 3 of IC1 is low pressure over the two legs a little.LED1 off, it will be.If we adjust VR1 compared to the pressure they can pretend to know the scale at the VR1.Voltmeter can not be used to measure the pressure of the alternating current (ACV) home.

Very simple voltmeter with ic741

 


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/very-simple-voltmeter-with-ic741/