Position: Index > Stereo Circuit >

BOOSTER_AMPLIFIER_FOR_CAR_STEREO_USE

2017-01-03 06:46  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


BOOSTER_AMPLIFIER_FOR_CAR_STEREO_USE
BOOSTER_AMPLIFIER_FOR_CAR_STEREO_USE
BOOSTER_AMPLIFIER_FOR_CAR_STEREO_USE
BOOSTER_AMPLIFIER_FOR_CAR_STEREO_USE
Only one channel of this circuit is shown. The other is practically a carbon copy.The input to the circuit, taken from your car radio's speaker output, is divided along two paths; in one path, a high-power divider network (consisting of R8 through R10) provides 4.5-Ω resistance to make the circuit's input impedance compatible with the output irrtpedance of the car radio. In the other path, the signal is fed to the input of U1 through resistor LR7, trimmer potentiometer R21, and capacitor C2. Together, R7 and R21 offer a minimum resistance of 27,000 Ω.Integrated circuit U1 (a TDA-2004 audio power amplifter) ampliftes the signal, which is then out-put at pins 8 and 10 and fed to the loudspeaker. Note: This amp is designed for use only with car radios whose speaker outputs are referenced to ground: do not use it with radios that have balanced outputs.