Position: Index > Switch Circuit >

Synchronous Stepdown Switching Regulator Circuit

2015-10-03 06:45  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


A shows a typical LTC 1148 surface-mount, application providing 5 V at 2 A from an input voltage of 5.5 V to 13.5 V. The operating efficiency, shown in B, peaks at 97% and exceeds 90% from 10 mA to 2 A with a 10-V input. Ql and Q2 comprise the main switch and synchronous switch, respectively, and inductor current is measured via the voltage drop across the current shunt. /vgENSE is the key component used to set the output, current capability according to the formula/QUT =100 mV/ftSENSE.
Synchronous Stepdown Switching Regulator Circuit

The advantages of current control include excellent line and load transient rejection, inherent short-circuit protection and controlled startup currents. Peak inductor current is limited to 150 mV//SENSE or 3 A for the circuit in A.



Reprinted Url Of This Article:
http://www.next.gr/power-supplies/switch-mode/synchronous-stepdown-switching-regulator-circuit-l14931.html