Position: Index > Switch Circuit >

Touch Switch II(NE555)

2015-10-17 12:35  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article briefly describes the Touch Switch II (NE555). This principle is easy to understand, but also very practical. Depth understanding of circuit elements, you can better grasp this principle. In this circuit, you can learn about and purchase these components: NE555.

This circuit uses a 555 timer as the bases of the touch switch. You can learn more about 555 timers in the Learning section on my site. When the plate is touched the 555 timer is triggered and the output on pin 3 goes high turning on theLEDand the buzzer for a certain period of time. The time that theLEDand the buzzer is on is based on the values of the capacitor and resistor connected to pin 6 & 7. The 10M resistor on pin 2 causes the the circuit to be very sensitive to the touch.

Figure:1

Figure 1 

 

 


Reprinted Url Of This Article:
http://www.eeweb.com/blog/extreme_circuits/touch-switch-ii