Position: Index > Switch Circuit >

Video Switch CIRCUIT (CD4017)

2015-10-08 13:31  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Video Switch CIRCUIT (CD4017). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:CD4017.

As the price of security camera going down, installing the camera in the shop, office, or even in home becomes economically feasible. Providing a dedicated monitor for every installed camera is not efficient, and your CRT monitor might suffer phosphor? burn if it used to display static image from only one camera.? To display 1, 2, 3, or 4 cameras in one monitor, you need a video switcher circuit. Here is the schematic diagram of the circuit:

video multiplexer circuit schematic

The core of this video switcher is MAX454 video multiplexer-amplifier from MAXIM. Care must be taken when designing the video signal path around this chip. Ground plane or track can be inserted between video signal channels to prevent crosstalk and noise interference. Using socket for IC is bad idea, you should solder the chip directly to the PCB. You can see a CD4017 sequencer driving the channel indicators (LED1-LED4). The output of this sequencer is not only drive the indicators, but also decoded to 2 bit binary data by D1…D4 to address the MAX454 multiplexer.


Reprinted Url Of This Article: