Audible Transistor Tester (CA3035)

2016-01-27 13:57  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

All types of transistors including Darlington and power will be tested in this project. Connect the 9v battery around the other way at points A and B to test PNP types.

TRANSISTOR TESTER 1 circuit schematic diagram

The transformer in the photo is a 10mH choke with 150 turns of 0.01mm wire wound over the 10mH winding. Then, the two original pins (with red and black leads) go to the primary winding and the fine wires are called the Sec. Connect the transformer either way in the circuit and reverse either the primary or secondary (but not both) if it does not work. Almost any audio transformer will work any speaker will be suitable.

This article describes the Audible Transistor Tester (CA3035). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:CA3035.


Reprinted Url Of This Article: