Quartz crystal tester circuit

2016-04-24 17:25  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Description.

This a very simple and inexpensive circuit that can be used to test quartz crystals.Here a Colpitts oscillator is wired used the transistor T1.When the crystal is connected between terminals A and B the circuit will produce high frequency oscillation.The oscillations will be generated only if the crystal is a good one.The diode OA91 will rectify these oscillations and it can be visually identified from the meter.The deflection of the meter will be directly proportional to the activity of the crystal.


Circuit diagram with Parts list.

quartz-crystal-tester-circuit

Notes.

Assemble the circuit on a general purpose PCB The circuit can be powered from a 9V PP3 battery. The push button switch S1 can be used as an ON/OFF switch. The meter M1 can be a  250uA FSD ammeter. POT R5 can be used to adjust the deflection of the meter. The crystal to be tested can be connected between terminal marked A and B.