Ultrasonic Measurement with Electrostatic Transducer (LM1812

2016-01-29 16:33  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Ultrasonic Measurement with Electrostatic Transducer (LM1812). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:LM1812.

This is a Electrostatic transducer for ultrasonic measurement circuit. This circuit uses the LM1812 ultrasonic transceiver. Transducer x1 and LM1812 will transmit a burst of oscillations. Then? the return echo is listened by using X1. The LM1812 detector will generate a pulse of the same width as the original burst when the X1 receive an echo of sufficient amplitude. If the return echo is early, it’s mean the object is near. Here is the schematic diagram of the circuit:

Electrostatic transducer for ultrasonic measurement circuit schematic

If the parts and values shown are used, this circuit has a range of about 4 inches to 30 feet. The X1 has a 500-pF capacitance that resonate with the L6 at 50 to 60kHz. The L1 is tuned to this frequency by watching for maximum echo sensitivity with a scope at pin 1.


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/ultrasonic-measurement-with-electrostatic-transducer/