Position: Index > Transmitter Circuit >

200M FM Transmitter

2016-04-09 22:33  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

A very stable and simple FM transmitter circuit is given here. With a matching antenna, this transmitter can attain a range of around 200 meters. I assembled this transmitter few years and got very good results. Let us see how the circuit works.
A condenser microphone (K1) is used to pick the sound to be transmitted. Capacitor C1 is a DC decoupler and the sound signal is coupled to the base of Q1 which wired as a preamplifier.R2 and R3 are the biasing resistors of Q1. Amplified sound signal will be available at the collector of Q1 and it coupled to the emitter of transistor Q2 through the capacitor C4 and 1mH inductor L1. Capacitor C4 decouples the DC component from the preamplifier output. Q2 performs the job of oscillator and modulator. Inductor L2 and variable capacitor C5 forms the tank circuit necessary for creating oscillations. Capacitor C6 is the feedback capacitor. The modulated FM wave will be available at the collector of Q1 and it is transmitted using the antenna A1.
Circuit diagram.

200M FM transmitter circuit


Assembling the circuit on a good PCB will give better results. I used a 12V battery for powering the circuit. A 9V PP3 battery will also do the job. A battery eliminator is also fine but it will induce noise. Antenna A1 can be a 25cm long copper wire. K1 is a condenser microphone. C2 should be a Tantalum capacitor. Variable capacitor C5 can be used to adjust the transmission frequency. This simplified formula will help you in making inductors, L = (d²n²) / (18d+40l). Where L is the inductance of the coil in uH , d is the coil diameter in inches, l is the coil length in inches and n is the number of turns. Just try to make the inductor your self using this formaula. If you can’t, then comment here.I will give you the winding details.