Position: Index > Transmitter Circuit >

6W Morse-Code Transmitter 7Mhz Circuit

2016-04-02 10:44  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The vacuum tube is still alive and useful in some applications, as in this CW transmitter, The circuit was built in old-fashioned breadboard style on a wooden base. Old table radios are a good source of parts for this circuit. V3 is used as a ballast resistora 75- or 100- 5-W resistor could be substituted. LI is 15 turns of hookup wire on a form 2 long.
6W Morse-Code Transmitter 7Mhz Circuit

L2 is 7 turns of the same wire. L2 is wound over LI. Be careful as up to 160 V is present onYl and V2.

Reprinted Url Of This Article: