Position: Index > Transmitter Circuit >

Low-frequency-transmitter

2016-04-04 14:56  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


The crystal oscillator, which uses two sections of IC1, a 4001 quad 2-input NOR gate, is a standard and reliable design. The oscillator`s 1.85-MHz, square-wave output feeds IC2, a 4017 divide-by-10 counter. The count enable and reset terminals, pins 13 and 15, are normally held high by resistor R3, and the counter is activated by bringing those pins low by closing telegraph key S1-an arrangement that guarantees that the final state of IC2 pin 12 is always high.
Low-frequency-transmitter

The high on IC2 pin 12 is inverted by a third section of the 4001, IC1c, to prevent de current flow through power amplifier Q1 during key-up periods.



Reprinted Url Of This Article:
http://www.next.gr/rf/transmitters/low-frequency-transmitter-l13816.html