Position: Index > Transmitter Circuit >

Simplest FM Transmitter.

2016-04-01 10:05  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


Here is the circuit diagram of the simplest FM transmitter using a transistor. Great performance or range is not guaranteed here, because this is an elementary design. General purpose radio frequency transistor BF 494 (Q1) is used here for obtaining FM modulation. A condenser mic is used here to pickup the sound. The condenser mic converts the sound to electrical variations and this variations are fed to the base of Q1, which performs the amplification as well as modulation. The capacitor  C2  and L1 determines the frequency of transmission. The circuit can be powered from a 9V transistor radio battery.

Circuit diagram and Parts list.  fm-transmitter-circuit.JPG Notes. 

The coil L1 can be made by winding 8 turns of 1mm thick enamel coated copper wire on a ball pen refill.  The coil should be tapped  at the  center for connecting the antenna. A 30 cm wire can be used as an antenna. Remember! This circuit is an elementary circuit. No good performance or range is not guaranteed. Ideal for demo applications only. I got only 8 meter range with some decent sound quality. Battery is strictly recommended because mains powered supply may induce additional noise.