Position: Index > Transmitter Circuit >

TRANSMITTER_OSCILLOSCOPE_COUPLER_FOR_CB_SIGNALS

2016-04-05 16:58  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


TRANSMITTER_OSCILLOSCOPE_COUPLER_FOR_CB_SIGNALS
To display an rf signal, connect L1 to the transmitter and points A and B to the vertical plates of the oscilloscope. Adjust L1 for minimum SWR and C3 for the desired trace height on the CRT. L2 = 4 turns #18 on 3/4 slug tuned rf coil form, L1 = 3 turns #22 adjacent to grounded end of L1, C1, and C2 = 5 pF, C3 = 75 pF trimmer.