Position: Index > Unclassified >

100K megohm DC probe

2017-08-18 05:06  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


A 741 op amp is used with 100% ac and dc feedback to provide a typical input impedance of 1011 ohm and unity gain. To avoid hum and rf pickup the input leads should be kept as short as possible and the circuit should be mounted in a small grounded case. Output leads may be long since the output impedance of the circuit is a fraction of an ohm
100K megohm DC probe

With no input the output level is indeterminate. Including Rl in the circuit through lowers the input impedance to 22 M.



Reprinted Url Of This Article:
http://www.next.gr/digital/logic-circuits/100k-megohm-dc-probe-l12921.html