Position: Index > Unclassified >

12 V High current regulator

2018-02-27 07:58  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Description.

This voltage regulator circuit can deliver up to 3A at 12V output voltage. The circuit can be employed on occasions when a current of more that 3A is demanded for regulator. IC regulators of such high current rating are pretty hard to find.

The transformer T1 steps down mains voltage, to 12rms & the rectifier bridge D1 rectifies it to produce a DC voltage. The C1 filters the rectifier output? and produces a? DC level. The series pass transistor Q1 (2N 3055) is biased by resistor R1 (680Ω). Since zener diode D1 is under breakdown region the voltage across it will be 12V. So the total output voltage will be steady 11.3 V(theoretically). That is the zener voltage minus base emitter voltage of Q1.Here transistor Q1 will conduct the excess current required .

Circuit diagram with Parts list.

12-v-high-current-regulator-circuit.JPG

Notes.

Assemble the circuit on a good quality PCB or common board.If 12V zener is not available ,use the nearest value.The transformer T1 can be as 23oV primary;15V/5A secondary? step down transformer.The capacitors must be rated at least 25V.By changing the value of the Zener diode, different output voltages can be obtained from the circuit.


Reprinted Url Of This Article:
http://www.circuitstoday.com/12-v-high-current-regulator