Position: Index > Unclassified >

Camera Trip Circuit

2017-08-15 07:05  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


This circuit was used to trip a camera shutter. Grounding pin 2 of U1 makes pin 4 of U1 go high. This triggers both tim
Camera Trip Circuit

ers of dual timer Ul. One output holds reset (pin 4) of U1 low to keep U1 from accepting another trigger, depending on the time constant of R7 and C3. This prevents camera film waste. The other timer is used to generate a 1/2-second pulse to drive U4 and Ql, the relay driver. K1 triggers the camera.



Reprinted Url Of This Article:
http://www.next.gr/video/camera-circuits/camera-trip-circuit-l14280.html