Position: Index > Unclassified >

Cheap siren with nand gate IC

2018-01-25 16:37  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This is a siren sound generator circuit. Which is less expensive and can create simple. The IC1 is usingCD4011(Digital Nand Gate) and the IC2 isCD4046.
Operation of the circuit, IC1 is a clock frequency 1 Hz.(Frequency adjusted by the value of R1 and C1.) Then it pluse IC1 regtifier through diode D1 to charge slowly with the C2 control of R3.

Then the C2 signal sends to IC2 at pin 9 (Control voltage input). For IC2, which actsVCO(Voltage Conrolled Oscillator).The frequency of the output voltage control. The frequency is changed by voltage and out to the speakers. The VR1 is the resistance adjustment and C3 affect the mean frequency of the circuit.If you turn off the switch S2 is not a siren sound, but it is another voice. And use of CMOS circuits to make very low watts of power, but also be useful in combination with other controls.


Reprinted Url Of This Article:
http://www.eleccircuit.com/cheap-siren-with-nand-gate-ic/