Position: Index > Unclassified >

Connection Diagram of DC PCB SSR

2018-01-20 09:58  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This is an Application note i used to give with my ssr – app012.pdf – Ananth

Diagram of SSR 5000 DC 3-30 Control / 230V AC N.O. @ 3A.

This is a Thyristor Based Normally Open 230V Switch that can be turned on / off at a fast rate. This switches at Zero Crossover . Use 5V DC for Best Results.

PCB SSR Wiring

No moving parts hence no wear and tear.Dissipates Heat when in On Condition 5 Watts @ 3 Amps.Mount with adequate Air Ventilation for 3 Amps.Dissipation is 1.4 Watts per Amp thru Load.Input to Output is optically isolated 1kV.This one is DC 3-30 Control AC 230V N.O. Output.Off state snubber Leakage is around 1 mA.

Notes -

The Termination’s of High Current Lines going to Load must be very tight and crimped. Loose contacts will Spark and cause Fire.

Fast Blow Fuse is to be used. Use a 2 Amps Fuse with Holder in the Hot Line.

Reprinted Url Of This Article: