Position: Index > Unclassified >

Cricket Chirping Generator Circuit (1N4148 )

2017-08-03 03:51  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article briefly describes the Cricket Chirping Generator Circuit (1N4148). This principle is easy to understand, but also very practical. Depth understanding of circuit elements, you can better grasp this principle. In this circuit, you can learn about and purchase these components: 1N4148.

Funny gadget for props and jokes, 5 – 12V Battery operation

This circuit generates an astonishingly real imitation of the chirping of the cricket. A suitable audio wave form is generated by IC2 and related components, driving the loudspeaker through Q1. To allow a more real-life behavior, the chirp is interrupted in a pseudo-casual way by two timers built around IC1C and IC1D, whose outputs are mixed into IC1B and further time-delayed by IC1A, driving the reset pin of IC2.

An optional Photo resistor can be wired across this pin and positive supply, allowing circuit starting in the dark and stopping when light is coming, thus imitating the cricket’s behavior even more closely. R9 acts as volume control and can be a preset trimmer or a small potentiometer.

Figure:1 Cricket Chirping Generator Circuit Diagram

Figure 1 Cricket Chirping Generator Circuit Diagram

Parts:

R1_____________330K 1/4W Resistor
R2_____________220K 1/4W Resistor
R3,R6__________100K 1/4W Resistors
R4_____________Photo resistor (Optional, see text)
R5,R7__________22K 1/4W Resistors
R8_____________10K 1/4W Resistor
R9_____________470R 1/2W Trimmer Cermet or Carbon
R10____________22R 1/4W Resistor
C1,C2,C3_______47μF 25V Electrolytic Capacitors
C4_____________10μF 25V Electrolytic Capacitor
C5_____________1μF 50V Electrolytic Capacitor
C6_____________10nF 63V Polyester Capacitor
D1,D2,D3,D4____1N4148 75V 150mA Diodes
Q1_____________BC547 45V 100mANPNTransistor
IC1_____________4093 Quad 2 input SchmittNANDGate IC
IC2_____________4060 14 stage ripple counter and oscillator IC
SPKR___________8 Ohm Small Loudspeaker
SW1____________SPST Toggle or Slide Switch
B1______________9V PP3 Battery (See Notes)

Notes:

The circuit can be powered by any battery voltage in the 5 – 12V range.For optimum results please use a loudspeaker as small as possible.In some cases, the chirp can be improved further on by pressing the loudspeaker against a flat surface, e.g. a wooden table.

 

 

 


Reprinted Url Of This Article:
http://www.eeweb.com/blog/extreme_circuits/cricket-chirping-generator-circuit-diagram