Position: Index > Unclassified >

Crystal-timebase

2017-09-03 20:55  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


An on-board oscillator and a 17-stage divider compose IC1. By connecting a standard 3.58-MHz, television color-burst crystal as shown, an accurate source of 60-Hz squarewaves is generated at the IC`s output, pin 1. Those pulses are then fed to IC2, a 4024 seven-stage ripple counter. Its outputs are connected to different gates in IC3, which is a dual four-input NAND gate.
Crystal-timebase

Depending on which position pulse-select switch S2 is on, one of those gates will provide an output/reset pulse of the selected width.



Reprinted Url Of This Article:
http://www.next.gr/oscillators/crystal/crystal-timebase-l13237.html