Position: Index > Unclassified >

EZ-USB FX2LP CY7C68013A HDD and USB BLASTER combo Developmen

2017-09-03 13:03  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.



Features  1, using CY7C68013A-56 chip, low-power version of the enhanced 51-core, 16KB program data areas, frequency 48MHZ, 480Mbps high-speed transmission protocol standards, in line with USB2.0 specification, backward compatible with USB1.1 2, firmware, EEPROM: Complete in-system programming solution with a USB cable directly to download firmware, on-board to provide 16K (24LC128) a large program memory (EEPROM), used as storage VID / PID and the USB firmware, the program space to meet the CY7C68013A Requirements 3, the onboard standard 40pin PATA (IDE) socket, use the GPIF CYPRESS interface can be achieved with the appropriate firmware (IDE hard disk) mobile hard disk function 4, the onboard standard USB Blaster download cable outlet, the firmware can be achieved with the corresponding function USB Blaster download, fully compatible with ALTERA USB Blaster, use, functionality and performance and to download the original line of the same ALTERA 5, 4 programmable LED board and 2 buttons, easy to show the user running the program with the trigger conditions and procedures 6, all the GPIO pin through the 2.54mm standard leads to greatly expand the convenience of learners to design their own  Cypress’s EZ-USB FX2LP™ CY7C68013A is a low power version of the EZ-USB FX2™ (CY7C68013), which is a highly integrated, low power USB 2.0 microcontroller. By integrating the USB 2.0 transceiver, serial interface engine (SIE), enhanced 8051 microcontroller, and a programmable peripheral interface in a single chip, Cypress has created a cost effective solution that provides superior time-to-market advantages with low power to enable bus powered applications.