Position: Index > Unclassified >

Electronic siren circuit

2018-02-28 16:29  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


This is a compact electronic siren circuit based on three transistors.This circuit is suitable for in corporating with other alarm or siren projects such as burglar alarms, automatic factory sirens etc or a simple push to on alarm.

The? electronic siren circuit given here ?is? based on a complementary transistor pair consisting of Q2 & Q3 (BC557 & BC 37)? wired as an astable multivibrator oscillator,which directly drives the speaker.The transistor Q1 is used to?provide a full charge?on capacitor C2 when power is turned ON.?When push button switch S1 is pressed , the capacitor C2?slowly discharges through resistor R8.This makes the circuit?to ?oscillate at a low frequency that increases to a high frequency and kept indefinitely as the capacitor is fully discharged. When the switch P1 is released, the output? frequency decreases slowly as C2 is charged to the? positive voltage through resistance R6 and the Base-Emitter junction of tramsistor Q2. When C2 is fully charged to the positive?battery voltage?the? circuit stops oscillating.

Circuit diagram with Parts list.



A 12 V battery or a a well regulated 12V DC power supply can be used to power the circuit.Assemble the circuit on a good quality PCB or common board.The switch S1 can be used to activate the alarm.The switch S2 can be used as a power switch.You can experiment on the tone of alarm by using different values for C2 and R8.
Reprinted Url Of This Article: