Position: Index > Unclassified >

Electronically Designed Dice Game Circuit by LM555

2018-11-12 13:23  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Figure 1 

The objective of the circuit is to build an electronic dice based on the functions of a 555 timer integrated circuit that operates in the astable mode.

LM555 – a highly stable device for generating accurate oscillation or time delays with additional terminals provided for resetting or triggering, used in linear ramp generator, pulse position and width modulation, time delay & pulse generation, sequential &precision; timing, with features such as adjustable duty cycle, temperature stability,TTLcompatible output, availability in 9-pinMSOPpackage, timing from microseconds, and operates in both astable & monostable modes4017 – a decade counter where the count advances as the clock input becomes high that may be combined with diodes for some functions such as flash sequencesBC550 – anNPNgeneral purpose transistor with low current and low voltage used for low noise stages in audio frequency equipment

The 555 IC is a highly stable device for generating oscillation or accurate time delays used in pulse width/position modulation, sequential timing, time delay generation, linear ramp generator, precision timing, and pulse generation due to its features such as normally open and normally off output, temperature stability, output and supplyTTLcompatible, adjustable duty cycle, and operates in both astable and monostable mode.

The astable mode produces a continuous square wave or rectangular pulses as with an oscillator. In this circuit, the clock pulses are fed to the IC2 through the 10K Ohms resistor. A 10 stage counter is the main function of IC2 where theRESETat pin 15 is connected to the output 6 at pin 5 which gives a 6 stage counter where the output if from 0 to 5. Three pairs were formed from six of theLEDs which will require 4 different signals coming from the 4 transistors. The transistors are connected to the essential outputs of the IC2.

To prevent short circuits to occur between outputs, diodes are being used when a transistor is operated from more than one output. TheINHIBITat pin 13 of IC2 is connected to the positive emitter voltage through a 100K Ohms resistor which stops the counter from advancing. Pin 13 will only connect to 0 V line when theSTARTbutton S1 is pressed since it is an open push switch. This will allow the counter to advance and will signify the throwing of the dice. The supply of the circuit may come from a 9 V battery source or from an external supply from 9 V to 12 V.


Figure 2 

The circuit for electronic dice can be seen mostly in role playing games and other types of board games. Some of the famous games include Monopoly, Snakes and the Ladder, Boggle, Dungeons and Dragons, Axis and Allies, and other games that will require random choices. The most acceptable advantage that the electronic circuit is to avoid the dice to be rolled off a table, which will eventually prevent cheating.


Reprinted Url Of This Article: