Position: Index > Unclassified >

Enlarger Exposure Meter Circuit

2017-08-15 08:04  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Two gates of a 4011 arc used as a comparator. When the resistance of R4 decreases the voltage atpin1 and 2 increases, producing a logic zero at pin 3, causing pin 4 to go high and activating the LED. R3 is calibrated in light units, or seconds exposure time. To calibrate, set pot R3 so as to just be on the LED ON/OFF threshold. With a light level that is suitable to correctly expose a photographic print,use a known enlarger and a known negative.
 

Enlarger Exposure Meter Circuit 
 

 

 



Reprinted Url Of This Article:
http://www.next.gr/video/camera-circuits/enlarger-exposure-meter-circuit-l14896.html