Position: Index > Unclassified >

Femto OS RTOS for Atmel AVR ATmega (2N706)

2017-04-13 13:08  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article introduces the Femto OS RTOS for Atmel AVR ATmega (2N706). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components: 2N706.

The Femto OS is a very concise portable real time – preemptive operating system (RTOS) for embedded microcontrollers with minimal ram and flash, say 2KB .. 16KB flash and 128 .. 1024 bytes ram. The main target is the Atmel AVR architecture, such as the ATtiny or smaller ATmega series.

 

Femto OS - RTOS for Atmel AVR ATmega

Femto OS is specially made for small embedded devices. For example, the ‘Smallest application’ is the application called ‘Bare’ compiled for the ATmega8. It solely runs a 16 bit led counter on the idle task hook. It consumes 258 bytes of flash and 10 bytes of ram.

- Ruud Vlaming

is an open source hardware project to realize home automation in your home with the following objectives: This is a home automation project using Femto OS on every controller.

If you are a electronic hobbyist, you probably dreamed of a fully automated home at some point.

Switch out all lights in the whole house when you leave, with just one button!Control every single light from your PC or phone.Let home automation protect your belongings.Receive a message when a light is broken somewhere outside.

 

 


Reprinted Url Of This Article:
http://www.dapj.net/hobby/2011/04/femto-os-rtos-for-atmel-avr-atmega/