Position: Index > Unclassified >

Function-generator

2017-09-04 00:04  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


This generator will supply sine, triangular, and square waves from 2Hz to 20kHz. This complete test instrument can be plugged into a standard 110 Vac line for power. VoVT will be up to ?±25 V (50 V pk-pk across loads as small as 10 0 (about 2.5 A maximum output current). Capacitor working voltages should be greater than 50 V de and all resistors should be 112 W, unless otherwise indicated.
Function-generator

The interconnecting leads from the 741 pins 2 and 3 to their respective resistors should be kept short, less than 2 inches if possible; longer leads might result in oscillation. Full output swing is possible to about 5kHz; after that the output begins to taper off because of the slew rate of the 741, until at 20kHz the output swing will be about 20 V,p?± 10 V. This problem can be remedied by simply using an op amp with a higher slew rate, such as the LF356.



Reprinted Url Of This Article:
http://www.next.gr/oscillators/varius-circuits/function-generator-l13349.html