Position: Index > Unclassified >

High voltage generator circuit

2018-01-28 03:23  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

First of all let me remind you that this circuit is a very dangerous one. The output voltage of this circuit is in Kilo volts and it can seriously injure you or kill you. Try this circuit only if you have enough experience dealing with high voltages. I have no responsibility on any hazards caused by the circuit. Be very careful. This is a humble request.

The circuit given here has three sections namely oscillator, switching stage and a step up stage. The oscillator is build around a NE555 timer operating at 25 KHz. The output of the NE555 coupled to the base of the power transistor TIP3055 which is the switching device. The power transistor drives primary of the step up transformer at 25 KHz and as a result a high voltage will be induced across its secondary.
Circuit diagram.

high voltage generator circuit


A 12V lead acid battery can be used for powering the circuit.TIP3055 must be mounted on a heat sink.T1 can be an EHT (extra high tension) transformer used in television sets.For an EHT from 20inch TV, the output voltage will be 8 to 10 KV @12V supply voltage.This circuit is not an efficient one and is not suitable for any serious applications.Once again, be very careful with this circuit!.
Reprinted Url Of This Article: