Position: Index > Unclassified >

How to build Melody Generator Circuit Diagram

2018-11-11 19:41  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


Here is the simplest melody generator circuit you can make using an IC.The UM66 series are CMOS IC’s designed for using in calling bell, phone and toys. It has a built in ROM programmed for playing music. The device has very low power consumption.Thanks for the CMOS technology.The melody will be available at pin3 of UM66 and here it is amplified by using Q1 to drive the speaker.Resistor R1 limits the base current of Q1 within the safe values.Capacitor C1 is meant for noise suppression.

Circuit diagram:

Melody Generator Circuit Diagram


R1 = 4.7KIC = UM66TQ1 = 2N2222C1 = 10uF-16vS1 = On/Off SwitchB1 = 1.5 - 4.5 BatterySP = 2R Speaker


Power supply must be between 1.5V & 4.5V .Do not exceed 4.5 V.Speaker can be driven with external NPN transistor.Melody begins from the first note if power is reseted.Assemble the circuit on a good quality common board.

Reprinted Url Of This Article: