Position: Index > Unclassified >

How to build Signal Tracer and Injector

2018-11-13 17:19  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Description:

A simple test circuit to fault find audio and radio equipment. Can be used to inject a square wave signal, rich in harmonics, or used with headphones as an audio tracer.

Circuit diagram

Signal Tracer and Injector-Circuit diagram

Notes:

A single pole double throw sitch is used to switch between inject and trace modes. The diagram is drawn in trace mode, the earpiece being connected to the collector of the last transistor. Both transistors are wired as emitter followers, providing high gain. DC blocking is provided by the 1n capacitor at the probe end, and the two stages are capacitively coupled.when the switch is thrown the opposite way (to the blue dot) both transistors are wired as an astable square wave generator. This provides enough harmonics from audio up to several hundred kilohertz and is useful for testing AM radio Receivers.







Reprinted Url Of This Article:
http://www.circuit-finder.com/categories/tools-and-measuring/miscellaneous-tools/324/signal-tracer-and-injector