Position: Index > Unclassified >

Hypersonic Sound Technology

2018-01-28 19:08  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
Hypersonic Sound System technology
Hypersonic Sound System Technology

Image Credit

Hypersonic Sound (HSS) is one of the most revolutionary digital sound reproduction technologies of this century.It is considered as one of the most innovative approach to sound engineering. This technology was developed by American Technology Corporation. The biggest advantage of this technology is that it does not include any complex electronic circuits having enclosures, crossovers, woofers, and midrange or tweeter elements as compared to conventional loudspeaker system. This technology also provides ideal characteristics to almost all audio frequencies (normal loudspeakers is not ideal for all frequencies such as 20Hz to 20 KHz).

HSS System
HSS System

Image From

Hypersonic system produces highly directional audio without any disturbance for outside. By using this technology, we can create virtual real audio. This technology works with the help of modulated ultrasonic waves (above 40KHz) and these waves itself create audio frequency waves according to the input audio signal (This property of? creating a new audio waves within the ultrasonic wave is called non linearity of air) .

Working of HSS System

HSS technology works on the property of non-linearity. ?Non-linearity is a property of air that creates new waves within another wave by the continuous expansion and contraction of waves. Here ultrasonic waves are used as modulated waves according to the input audio signal. This wave, when passing through the air, creates new sound waves within the range of human hearing (20Hz-20KHz).We can’t get any disturbance from the ultrasonic sound (since it can’t be heard by the human ear), we can only hear the newly generated audio waves (that same as the input audio).

HSS System Architecture
HSS System Architecture

The architecture of ultrasonic transducer is given above. This structure consists of multiple sections as explained below


    As like all electronic equipments, The HSS system is also powered with a highly filtered SMPS. Normally multi-voltage power supplies are used as SMPS. According to the power at the output, the supply voltage may vary from 12V to 60V.

      Microcontroller Unit

      This unit can perform all the audio adjustments. Usually 16 to 32 bit microcontrollers are used as the microcontroller.

        Audio Signal Processing Unit

        Audio signal processing unit is an advanced audio circuit that consists of multichannel-Multi format High Definition Audio processor. This circuit detects and decodes all audio inputs and are filtered according to the requirement and sent to a digital pre-amp unit. We can provide several types of inputs to this unit like single channel, multichannel audio up to 11.2 channels, and also all the DTS and DOLBY digital true audio formats, etc. This section decodes almost all type of digital audios present. This unit also controls equalization, other dynamic controls, etc

          Digital Audio Pre-amp

          Digital audio pre-amp is used for the pre-amplification of the decoded audio from the audio signal processor. After pre-amplification is completed, the pre amplified audio is sent to the ultrasonic modulator

            Variable Carrier Frequency Oscillator (VCFO)

            This is an ultrasonic oscillator circuit used for the generation of ultrasonic carrier waves for the modulation. Usually ultrasonic crystal oscillators are used for making these oscillations and its frequency is above 40 KHz.

              Dynamic DSB Modulator

              Dynamic DSB modulator performs the Ultrasound modulation with the audio signal. In this unit, the input digital audio is modulated with the high frequency ultrasonic waves and produces a HF modulated wave. This unit also filters all other HF disturbances too. In DSB system, the modulation index can be reduced to suppress all the distortions.

                Ultrasonic Power Amplifier

                Ultrasonic power amplifier is a HF Power amplifier that increases the power at the output stage. This is the final stage of HSS amplifier unit. After the HF power amplification, the signal is fed to the monolithic film transducers, which transmit the HSS audio

                  Monolithic Film Transducers

                  Monolithic Film Transducers are used for the emission of HSS waves in to air. Usually piezoelectric polyvinylidene transducers are used as transducer. The signal from the UF power amplifier is emitted into the air by transducer. The ultrasonic waves are highly directional and transmit like a flash light. Inside this range of HSS sound beam, the audio can be heard by human. Outside this range, there is nothing to hear.

                  The characteristics and frequency response of HSS sound system is given below

                  HSS Characteristics

                  HSS Characteristics


                  1)???? Highly focused directional audio

                  2)???? Very thin and light weight transducer used as ultrasonic emitter.

                  3)???? The sound only can hear within a particular angle.

                  4)???? Provide HD real audio for virtual reality (virtual real audio processing is possible).

                  5)???? Support multi channel audio.


                  1)???? High operating voltage required as compared to normal audio amplifier.

                  2)???? Direct analog amplification is not possible.

                  3)???? Minimum stereo quality sound input required for the proper working.

                  4)???? High manufacturing cost.

                  Reprinted Url Of This Article: