Position: Index > Unclassified >

Instrument preamp

2017-09-07 08:33  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


The input impedance is the value of potentiometer Rl. If your instrument has extra-deep bass, change capacitor Cl to 0.5 mF. What appears to be an extra part in the feedback loop is a brightening tone control. The basic feedback from the op amp's output (pin 6) to the inverting input (pin 2) consists of resistor R7, and the series connection of resistor R4 and capacitor C3, which produce a voltage gain of almost 5 (almost 14 dB). That should be more extra oomph than usually needed.
Instrument preamp

If the circuit is somewhat short on bass response, increase the value of capacitor C3 to 1 to 10 ?μ. Start with 1 ?μ?¥ and increase the value until you get the bass effect you want.



Reprinted Url Of This Article:
http://www.next.gr/audio/preamplifiers/instrument-preamp-l12104.html