Position: Index > Unclassified >

Introduction of biological muscle stimulator

2017-08-08 10:05  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

 

This article is a biological muscle stimulator introduction. The principle of combining text comprehension is a good suggestion. The principle is very simple but very practical and effective. The biological muscle stimulator has a very effective and safer way to adjust the output amplitude. Fine adjustment of the "pulse" and "pulse width" is also added, plus the switch allows for more complex wave form output AC voltage signal (SW1 when closed). Is a small power transformer  T1 230 @ 100 years or 150 years, 12 volts horse. It must reverse connection, a secondary winding 12 v collector of Q3 and negative ground, and the primary winding 230 v, P3, and the output electrode. Circuits have been thoroughly tested, and it works well when 3 v - provides 9 v ranges. Running at 3 v 12 v 1.2 va supply a transformer will not be more dangerous than this circuit has been published. Note, however, use the 9 v battery supply which can output 120 v signal and can be very dangerous. Small metal plate electrode can be obtained an output connected to the circuit by a usual wires and is adhered to the skin. In some cases, a small amount of water moisture prove useful.

Muscular Bio-Stimulator (2nd Version)

Parts:

 

P1_____________100K  Linear Potentiometer
P2,P3___________10K  Linear Potentiometers

R1_____________560K  1/4W Resistor
R2______________68K  1/4W Resistor
R3,R4___________10K  1/4W Resistors
R5______________22K  1/4W Resistor
R6,R7____________4K7 1/4W Resistors
R8_____________330R  1/4W Resistor
R9_______________2K2 1/4W Resistor
R10____________470R  1/4W Resistor
R11_____________47R  1/4W Resistor

C1_______________1μF  63V Polyester Capacitor
C2,C3__________100nF  63V Polyester or Ceramic Capacitors
C4_____________220nF  63V Polyester Capacitor
C5_____________220μF  25V Electrolytic Capacitor

D1______________LED  (Any dimension, shape and color)
D2,D3________1N4148   75V 150mA Diodes

Q1____________BC547   45V 100mA NPN Transistor
Q2,Q3_________BC327   45V 800mA PNP Transistors

IC1,IC2________7555 or TS555CN CMos Timer ICs

T1_____________230V Primary, 12V Secondary 1.2VA Mains transformer (see Notes)

SW1,SW2________SPST  Toggle or Slide Switches

B1_______________3V to 9V Batteries (See Notes)

 

 


Reprinted Url Of This Article:
http://circuits.radio-electronics.co/health/muscular-bio-stimulator-2nd-version/