Position: Index > Unclassified >

Live Line Detector-Indicator

2018-01-15 06:22  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Detects the presence of a live mains conductor, Minimum parts counting



If the unit is brought close to a live conductor (insulated, and even buried in plaster) capacitive coupling between the live conductor and the probe clocks the counter, and causes the LED to flash 5 times per second, because the 4017 IC divides the mains 50Hz frequency by 10. When remote from a live line, the unit stops counting, the LED resulting permanently off.



Circuit diagram:
 Main Line or Live Line detector indicator Circuit Schematic Diagram
Live-Line Detector Circuit Diagram


Parts:

P1 = SPST Pushbutton
D1 = Red LED (any type)
C1 = 100nF 63V Polyester or Ceramic Capacitor
B1 = 3V Battery (two 1.5V AA or AAA cells in series etc.)
IC1 = 4017 Decade counter with 10 decoded outputs IC
Sensing probe 3 to 15 cm. long, stiff insulated piece of wire



Notes:
Sensitivity can be varied using a more or less long sensing probe.Due to 3V operation, the LED's current limiting resistor can be omitted.Source: Red Free Circuit Design