Position: Index > Unclassified >

Musical Envelope Generator And Modulator

2017-09-10 06:58  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

A gate voltage is applied to initiate the proceedings. When the gate voltage is in the ON state, Q
Musical Envelope Generator And Modulator

l is turned on, and capacitor C is charged up via the attack pot in series with the l-kfl resistor. By varying this pot, the attack time constant can be manipulated. A fast attack gives a percussive sound, a slow attack gives the effect of `backward` sounds. When the gate voltage returns to its OFF state, Q2 is turned on and the capacitor is then discharged via the decay pot and the other 1-KOhmhm resistor to ground. Thus, the decay time constant of the envelope is also variable. This envelope is buffered by IC1, a high-impedance voltage follower and is applied to Q3, which is being used as a transistor chopper. A musical tone in the form of a square wave is connected to the base of Q3. This turns the transistor on or off. Thus, the envelope is chopped up at regular intervals, which are determined by the pitch of the square wave. The resultant waveform has the amplitude of the envelope and the harmonic structure of the square wave. IC2 is used as a virtual earth amplifier to buffer the signal and D1 ensures that the envelope dies away at the end of a note.

Reprinted Url Of This Article: