Position: Index > Unclassified >

NON-ZERO-CROSSING TRIACS MOC3011

2017-08-20 07:00  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The MOC3011 optoisolator should not be used to drive a load directly. It is intended to be a trigger device only. Additional information on the use of the MOC3011 is available in Application Note AN–780A.

MOC3011

 

                                         Figure1. Resistive Load

MOC3011

           Figure 2. Inductive Load with Sensitive Gate Triac (IGT _ 15 mA)

MOC3011

 

Figure 3. Inductive Load with Non–Sensitive Gate Triac (15 mA _ IGT _ 50 mA)