Position: Index > Unclassified >

New LPC1768 based development board

2017-11-30 23:19  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Continuing with its endeavor to deliver low cost micro controller hardware development platform, NGX has now launched a new low cost prototyping platform for LPC1768 series of mircocontrollers. LPC1700 are ARM cortex-M3 based micro controllers. The platform is named BlueBoard-LPC1768-H and costs only $32.5

BlueBoard-LPC1768-H is a breakout board for LPC1768 cortex-M3 based microcontroller. The LPC1768 microcontroller has 512KB of internal flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface, 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C-bus interfaces, 2-input plus 2-output I2S-bus interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock (RTC) with separate battery supply, and up to 70 general purpose I/O pins

Board can be purchased from http://shop.ngxtechnologies.com/product_info.php?cPath=21&products_id=65

Following are the salient features of the board.
* Dimensions: 94.08×54.48 mm2
* Two layer PCB (FR-4 material)
* Power: USB powered or can be powered through the DC jack, 5-7.5V input
* reset switch
* Test LED
* 32Khz crystal for RTC
* On board 258kb I2C EERPOM
* Extension headers for all microcontroller pins
* USB B-type connector for powering the board
* 20pin – JTAG connector


Reprinted Url Of This Article:
http://www.scienceprog.com/new-lpc1768-based-development-board/