Position: Index > Unclassified >

Non-integer programmable pulse divider

2017-09-05 06:32  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


In applications where the period of the input pulses is uneven and the divider is required to cover a wide range of frequencies, the non-integer programmable pulse divider shown can be used. The purpose of the D-type flip-flop (IC2) is to synchronize the input signal with the clock pulse. When the clock pulse changes from low to high and the input is high, IC2 output goes high. Subsequently, IC3 resets to zero and starts counting up.
Non-integer programmable pulse divider

The number of pulses at the output of IC3 is ten time the input pulse. IC4 and ICS are cascaded to form a two decade programmable down counter.



Reprinted Url Of This Article:
http://www.next.gr/oscillators/varius-circuits/non-integer-programmable-pulse-divider-l12294.html