Position: Index > Unclassified >

Photo relay circuit

2018-02-26 07:27  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

A photo relay or light activated relay is a circuit which opens and closes the relay contacts according to the light.Here a photo diode is used to sense the light.The photo diode offers a high resistance when there is no light falling on it.Here the photo diode is connected in reverse biased condition.The only current flowing through it will be due to the minority carriers.When light falls on it, the current due to the minority carriers increase and the diode offers a low resistance.As a result the voltage across the diode will not be sufficient to make the transistor Q1 forward biased and the relay will OFF.When there is darkness the photo diode resistance increases and the voltage across it will become enough to forward bias the transistor Q1 making the relay ON.The diode D2 is used as a freewheeling diode to protect the transistor from transients produced to the switching of relay. By this way the load connected through the relay contacts can be switched ON and OFF according to the light falling on the photo diode.

Circuit diagram with Parts list.



Assemble the circuit on a general purpose PCB.The circuit can be powered from 9V DC.The preset R1 can be used to adjust the sensitivity of the circuit.The D1 can be any general purpose photo diode.
Reprinted Url Of This Article: