Position: Index >

Prototyping to prove a Design Concept (MPF102)

2017-07-04 21:49  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes Prototyping to prove a Design Concept (MPF102). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:MPF102.

Before simulation in EDA tools. First stage of concept proof or design tweaks were made on BreadBoard, Stripboard or General Purpose PCB.

Even now it is used after simulation or directly. Many RF and Power electronics designs may have to be verified and modified on Pilot Production. Digital Designs and Software/Firmware checks don't need hardware prototypes, but need a proven framework to test it on.

Hobby and Education learning must use breadboards alongside simulation, even though educational eda tools are used. Breadboard connects us with the reality, the way it is. Then you will even simulate better.

Robotics and Developing Mechatronics Solutions may need prototyping and modifications many times over.

 

This is a nice "Page with Pictures" that we all like. John Luciani explains how to prototype a circuit to try out a concept. Soldering and Shiny joints are everything in electronics. One dry solder, a cut track, a solder bridge or splatter near the IC can make a card malfunction.

Luciani.org Breadboard Hints

Thin copper tracks taking high currents, HV and LV circuit isolation, Ground loops, RF Antenna Effect, Ground Plane and Guard rings are just some things to know on Component to Component Connections, that make a huge difference.

 

In Design Notes of you will find my learning notes in electronics. How this learning happened ?

I had setup my Hobby Science/Electronics Lab when i was in School, In college i was helping others learn practical electronics. I worked in Product Design and Engineering Departments when i was Employed. During this time my Electronics Lab was a Free Training Center, sponsored by my own pay. Then i started my manufacturing firm.

  

 


Reprinted Url Of This Article:
http://hobby.dapj.com/2011/07/prototyping-to-prove-design-concept.html